My 3d Modeling.

I have recently had alot of request for rims/tires & other parts along with full cars. I have decided to accept request on a fair trade deal.

Let me explain how this works.
I not only do alot of 3d modeling but I am also a bit of a Forza Motorsports Fan (xbox 360).
That said I have decided to take 3d modeling request in trade for (NEW - Xbox (microsoft) Points, 1month, 3months & 12months(1 year) Xbox live gold.

How it works is you contact me via blog, skype, yahoo, msn messenger OR EMAIL (though MSN). And make your request. I will then reply with how long it will take me to complete the model, Price
[example: 3 different sets of rims (anystyle) will cost - 1month xbox live gold OR "800" Xbox (microsoft) Points ]

I specialize in modeling the following: Car Audio, Rim & Tires, Misc. Parts (5th wheel continental kits, Engines, Grills), & Full 3d cars. Now mind you what I will charge for a for a FULL 3D Car model will be NO LESS than "4000 Xbox (microsoft) Points OR 12 month xbox live gold (That averages about $60.00 USD).

Payment procedure will be discussed VIA EMAIL! But to make it know, Payment process this way is far easier than Paypal & Other means.

When ever I have new models for sale they will be posted here starting with "FOR SALE" in the beginning of the post title!

Project From The Previous Week..

Well, below is what I have been working on for the past week.. 

Anyone Familiar With Older GTA-VC & SA Mods Has Probably Seen This Car Mod Before!

Original VC Mod By: RusLev, Converted To SA By: Bad Religion!

NOW BELOW!

Is Some Of The Modifications I Have Made Along With ALOT Of Scratch Modeling Done By: MYSELF!

1st Image Notes: 

-A Look @ The Custom 28inch Deep Dish (9inch lip) "Deek" Designed Blade Rims (I Did Have To Edit The Original Wheel Well Housings To Allow The Clean Fit Of The Larger Rims-So That It Did NOT Have To Have The Suspension Raised "Drastically").

-- 3D Modeling Start Of What Will Be A CUSTOM "Center Console" Subwoofer Enclosure.

---A "Simple" Roof/Body Edit To Make It A "Targa" Top (Still Some Work Left To Do On It).

Below!:

I Reshaped The Inner Trunk To Give It More Space, Which I Will Be Using To House "Another" Custom Audio Setup Made By Me...:P  

Below:

Scratch Modeled Frame & Rear Axle, (Both Of Which Are Modeled By MYSELF). I Still Need To Finish The Front Before I Model The Shocks & Springs.. 

Below:

Here You Can View The Front Section Of The Cars Frame, & Automatic Transmission Along With a Custom Oil, Starter & Exhaust Header Ends. All Of Which I Modeled 100% By Myself.

My Oil Pan Model Is Actually My Attempt To Replicate The Real Aftermarket Oilpan Avalible For This Engine In "Real" Life...

Below:

The Hardest & Longest Part Of This Custom Lincoln.. 

My Scratch Modeled - 460 Cubic Inch Big Block Ford V8...

Nothing About This Engine Is "Factory" Other Than The 460Cubic Inch Diameter...

All Custom Billet Style Pullys, Custom Edelbrock Carbs & Intake Manifold, Custom Edelbrock Style Aircleaners, Valve Covers "WITH" 3D Ford Logo.. 

I Did My Best To Keep The Poly Count Down, My Last Count As It Stood In "THIS" Picture Was Just Under 47,000 Polys.. 

(P.S - Sorry About My Shitty Rendering Skills... Deal With It.. I Can't Do Everything Perfect ALL The Time.. Just 99.9% Of The Time) 

Below:

A Preview Of The Ford 460C.I V8 In The Lincoln's Work In Progress (Yet To Be Finished) Engine Bay.. 

Now:

I Still Have ALOT Of Work Left To Do On This Mod, So I Will Keep You All Updated From Time 2 Time.

Plans:

New Modeled Fully 3D Grill (To Replace The Low Poly Shit Job Texture They Originally Had)..

Some 3D Re-Working Of Thier Original Front & Rear Bumpers...

The List Goes On..lol

I Am However Taken A Short Break From This Mod W.I.P, To Allow Myself A Few Days To Practice Some Ingaming Since It Is A Weak Point I Have Yet To Master..

A Little Bit Of Spare Time......

Well as I felt it was time to look back on some of my earlier work, I decided it was time to take so of my older modeling and give it new life.. Starting with...

For those who have followed my blog from the start (or aleast looked back at my first few post)... I was at one point working on 3d modeling a nice set of  "Texan Wire Wheels" (a.K.a.) 83's/84's.. I decided to DELETE most of what I had originally done the 1st time and start to detail it more "accurate" to my liking.. along with give it some new tread to roll on:)

BUT 1ST! A picture Of my ORIGINAL "T.W.W." Model & Tire

Now:! Here are the new [FINISHED MODEL] Pictures...
-Old: Lugnuts, Deek Logo'd Center Cap, The "10" Spokes Going From Center Cap To - Rim....
--New: Complete Outer Rim, "3D" Vogue Tire Sidewall & Complete Tire, Valve Stem, "20" Spokes Going From Lugnut "HUB" To - Rim....

Next: Vogue Tire Texture, Probably Could Have Looked Better.... BUT I Am Happy With The Results :)

Next: -- 1ST Off Let Me Say, YES I KNOW! The Tread Does NOT Line Up Perfect... It's Close Enough For Using In GTA Though.... (BTW - This Rim Is Ment To Replicate A "15 Inch" Tire/Wheel Package! Which Is Why The Tire Is NOT Set To Be A Low Profile!)

And Last, This Is Just A "Spare/Extra" Part I Made With Part Of The Rim.. It Is What We Call... A 5TH WHEEL (OR/a.K.a.) A "Continental Kit".....

Example Of A 5TH Wheel/Continental Kit: You WILL Notice A Wheel "Resembling The Image ABOVE!" Mounted On The REAR Bumper!

Deek a.K.a The King Of Slabs Presents.....

Along with a New friend.. we decided it was time to take GTA-SA to a whole new level.. So between my pure awesome talent of modeling, his decent talent of  modeling.. & awesome talent of ingaming just about anything I can model.. I now present to you.. the people of GTA-modding.. ONE HELL OF A CRAZY CUSTOM!

??? WTF IS THIS.. Another Rolls-Royce????

OF COURSE NOT.. That would be to easy for the King Of Slabs......

22 inch Custom "Bladez" Modeled by: Me (Deek)

Now Time for the Show... :)

By now you have probably went :O then said WTF Deek.. Well.. There is more :)

 That's correct there people.. a ragtop Chevy Phantom Wagon.. And being set in that big empty cargo spot in the back.. A top of the line custom audio setup....

Rolls Royce Phantom Front model: NikiTooh

Chevy Caprice Wagon Model: Pumbars

Still alot of work left.. but the final result will be mind blowing and worth it!

New Drift Team!!!

For a few years now [GFP] Tag I run has only been used by me.. But with my recent return to SAMP, I started to think.. Maybe it's time Deek started his own drift team.. 

[WDT]

A.k.A:

WhipLash Drift Team

Here are some of the basic NEED TO KNOWS, that will be useful to know BEFORE apply!

[ Test Server [SDU] SA-MP Drift Union Community Server ] 

-You will need SA-MP 0.3"a" to take test-

1. Tests will be given by ME only. 

2. There are "5" Test areas "4" which take place on the STANDARD gta-sa map which I will ride ALONG with you for the test! The FINAL test which takes place on SAnika you will need to go HEAD to HEAD against ME.. you do NOT need to beat me, but you do have to remain close. IF you happen to beat me that is fine. but the whole purpose is to make sure you can handle opponents.. 

I have also taken the time to mark those 4 STANDARD gta-sa test areas on the map BELOW!

3. You may use handling line mods "HOWEVER" it will be best you contact me in advance to let me know your handling line and which car it is placed on - so that during the test it don't look like you suck! lol... Hopefully this rule makes sense!

4. TEAM MEMBERS MUST BE RESPECTFUL! I do not allow childish behavior! You WILL respect any and all other team members and or OTHER TEAMS! if there are any problems with OTHER TEAMS.. or members of my team... bring them to ME and I will do my best to solve them..

---

Team Application

Current SA-MP Name:

-Other Teams You Belong To:

Age:

Country:

-Native Language:

--Can you speak English?:

( I only speak english so please keep that in mind! )

Will you be using a Handling Line mod?: 

---!Please Reply to this Post by Leaving a comment with your application info!---

Test Area image below!

Last Minute New Project Idea...

 Before anyone asks "NO" The -Supra Bad Celica- is NOT trashed.. I plan on continuing it after I finish this last minute brainstorm.. 

I now Introduce you all to probably the first ever for GTA-SA, Toyota MK3 Widebody.... But to make it sweeter, NOT ONLY is it a Widebody, but it happens to be a MK3 TRUCK!

Update!

  Ok... This update really does not have to do with modeling however it is an important update just the same.

I finally upgraded my operating system from Windows XP home SP3 -TO- Windows XP Pro SP2. I am currently still in the middle of re-installing all my old programs and testing to make sure this OS will be more stable than my XP HOME OS was previously.. 


  The "Supra" Bad Celica project is not dead nore forgotten, it is just on hodl until my PC is back to fully functional..
Thank you all for the support and comments.. Will keep updated as often as I can:)

"Supra" Bad Celica

Well, here it is folks.. Deek's "Supra" Bad Celica.. 

The body kit is almost finished along with the engine bay..

Once they are both complete it will be onto the interior!

Home Sweet Home for the 1JZGTTE

Well the majority of the 1JZ is finished.... It has finally been fitted nicely inside it's new home...

It still has a little work left that I could only continue with after it has been fitted inside the engine bay...

Total 1JZGTTE poly/faces count as of current = 21,804

[Which happens to be roughly 2,000 polys/faces less than I was expecting HOWEVER, I just have a few parts left to model after I make an "inner" engine-bay...

Looks Sexy.....;)

1JZGTTE intake update..

Well progress on the 1JZ is coming along nicely.. Intake is looking beautiful.. it's all coming together nicely and I should remain under my 30K poly max limit, although the intake was a little over 5,000 poly add to the already near 12K poly before the intake was designed and modeled..

[Note:] As normal I have NOT applied mesh smoothing to this so it's still a little rough!

1JZ Update....

Been a few days since I updated my 1jz progress...

[Please Remember I am trying to make this a low to mid poly, yet detailed 3d Engine... Also I have not applied any mesh smoothing as of yet..]

So far the TOTAL count is @ 11,654 "faces"

Still have the BOV's and a few other parts for the turbo to make before those are complete.. 

It's surely one of a kind though:)

New Celica-Supra update... And Start Of the 1JZGTTE Power-plant..

This will be about 25,000/30,000 Poly when complete

It still needs ALOT of adjustment but once I have all the parts modeled I will fit it together better when I put it into the Celica-Supra.. [1JZGTTE]

Finished Rear Spoiler.... From the picture in my mind of  "9" years ago.. I would say that it is 93% accurate to how the spoiler on my brother-in-law's celica supra looked... 

Custom W-I-P 1984 Celica Supra

  Ok Long story short, My nephew's father back in the early/mid 1990's before my nephew was born Owned a 1983 Toyota Celica Supra. It was Lowered, body kit and chrome 15 inch wheels hella flushed.. 

I am trying my best to recreate it into a 3d model. I started with the STOCK 1984 Forza 3 [Celica Supra] model... 

  The body kit and wheels are still a good image in my mind because back then I thought it was the coolest car ever...lol I tried to ask him for pictures however:( He nolonger has any that he can find.. So I am modeling this all off memory and a few crappy pics I could find on google to reference the body kit too.. The wheels how ever no pics so they might not be PERFECT but they are damn fucking close.. 

List of parts "I" myself am modeling!

-Spoiler to match the one he had on his 1983 celica supra.

--Body Kit: Rear bumper, Side skirts & Front bumper (The main body as a said is from Forza 3)

---Early 1990's ICW style 3 spoke chrome deep dish wheels (which are pictured below) :D 

----Engine Bay- Will not be to detailed.. just the basics to look decent if I decide to put it into GTA... 

-----I "might" model a 1jz just for the hell of it for this model I havent decided yet.. 

Ok Here are some pics.. 

Good start to the style of wheel he had on his 1983 celica supra.. :) wish I could remember the exsact name.. 

I got more Flush than a Toilet bowl.. YA FEEL ME!

Finished!! Except texture.. ALSO not sure if I will use 3d tread IF i decide to turn this into a GTA mod... 

I had just finished the rear bumper, Had not molded the fender flare to it yet..  That will be in next picture:)

Fender flares molded to the rear bumper (not attached but molded to look as if they were).. Along with a qiuck 100 or so poly exhaust tip I made just for rendering.. 

This Is the Progress I have Gotten done on the Spoiler so far.. (its far from finished)

This also shows where I started getting the side ready for the new sideskirts :) 

Preview of my Scratch modeled SR20 Engine...

HIGH POLY near 200K [WITHOUT] Intake, Turbo & Exhuast.... Very Detailed.. I will post more pics at some point.. This is a requested view by those who MSN act dumb for when I try to photoshare with them....

AND NO! This is NOT for download...

Some 3D Audio shit modeled by ME! Read all the little notes for details!

Ok so I promised Some Pictures.. Here They Are.. ALL AUDIO & WHEELS MODELED BY ME!!

[The CARS how ever I did NOT model - Respect to thier authors..I Have NOT made ANY MAJOR changes of thier modeling, I have only added to it! As it is hard to get a hold of people to ask permission to completely tear the model apart like most of the mod thiefs do..!]

!!!!Do NOT ask for downloads.. there wont be any.. how ever The AUDIO will be listed on TURBOSQUID for 10$!!!!

Below: The start of my 3D audio setup.. The NEON lettering.. [It's a Texas Thang...]

Below: The starting of the 3D Sub Enclosure...

Below: The FINISHED Sub Enclosure & The Begining Of Modeling The "audiobahn" Subwoofer...

Below: The Start Off modeling of the FRONT "cone" of the "audiobahn" subwoofer...

Below: The FULLY 3D "audiobahn" logo... [Yeah thats how I do.. no simple modeling and than putting all the details in textures.. I do it BIG DOG style!..] 

Below: The Finished "audiobahn" subwoofer... [Was so busy modeling I lost track & forgot to make some W-I-P renders to go from the start to the FINISHED result - MY BAD]

Below: Finished 3d Sub Enclosure & Subwoofer, YES ALL the flames are fully 3D... [Also the start of modeling the "audiobahn" Amp...

Below: Details Being made to the Amp Mesh....[I am sure by now you are all drooling..lol]

Below: MORE 3D detail added to the Amp, Includes 3D flames, Wire hook-ups, Fuse slots, BASICLY to make the list short & save time.. It's ALL 3D!!!

                                            

                                                                                   Below: The Completed Sub Enclosure, Subwoofers & AMP! & The Start Modeling of my Texan Wire Wheels (A.K.A. 84s / Swangaz) [Note: Yes I did also model a 3D Chain Steering Wheel!]

Ok Now: Below... I Did NOT get a chance to Take Many W-I-P Pics Because I designed the NEW Enclosure From An Idea In My Head.. So I didn't Take the time to stop modeling..sorry.. live with it.... 

Below: Trial fitting the newly redesigned 3d Sub Enclosure (Yes! I know there is a Wheel there.. It's called a Continental Kit! (A.K.A - 5th Wheel)

Below: [5]Fully 3D 6x9 Audiobahn DUB edition speakers... [6] Fully 3D 5-1/2 Audiobahn DOOR speakers, Only 3 are photoed....[3] Speakers PER Door! (3D Chain Link Steering Wheel Modeled By ME also)

                                                                                Below: Upclose render of the Trunk audio... Which Includes The Following: [4] Audiobahn Flamed Subwoofers (2 in - 2 out), [1] Audiobahn capacitor, [1] 7inch DVD screen & [2] Audiobahn Flamed 2300 Amps.. All in a custom modeled Enclosure...

Below: Close up/Different angle view of the "3D" flame modeling on the subwoofers & amps....

Below: Nicely Detailed set of 30spoke Texan Wire Wheels (A.K.A. - 84s / Swangaz) [It's a Texas Thang!) [ALSO This was taken BEFORE I applied mesh smoothing...]

  

[!!!NOTE!!! - There are some audio models not shown such as the 15 inch flipdown incar dvd screen, [2] 7inch headrest DVD screens & a fully 3D audiobahn headunit with fold out navigation screen... Those of which are still being detailed to look PERFECT!!!!]